Description
With the SBR and the MPW firing 1400 BBs per minute, might want to pick up a few of these.
- Spring feeds 25 BBs for rapid-fire action
- Holds two Powerlet CO2 cartridges
- Compatible with the Crosman Full Auto R1
$60.90
25 Round Magazine
With the SBR and the MPW firing 1400 BBs per minute, might want to pick up a few of these.
| Weight | 1.49 lbs |
|---|
Only logged in customers who have purchased this product may leave a review.
THIS DEVICE IS A REPLICA FIREARM UNDER DIFFERENT STATE LAWS. DO NOT BRANDISH, DISPLAY, EXHIBIT OR EMPLOY THIS AIRGUN: (I) IN PUBLIC, SINCE IT MAY CONFUSE PEOPLE; OR (II) IN A THREATENING MANNER, BY CAUSING OR ATTEMPTING TO CAUSE TERROR TO ANOTHER PERSON, OR BY ACTING WITH RECKLESS DISREGARD FOR THE RISK OF CAUSING TERROR TO ANOTHER PERSON. IT MAY BE A CRIME PUNISHABLE BY FINES AND IMPRISONMENT. POLICE AND OTHERS MAY THINK THIS ARIGUN IS A FIREARM. DO NOT CHANGE THE COLORATION AND MARKINGS REQUIRED BY STATE OR DEFERAL LAW OR REGULATIONS TO MAKE IT LOOK LIKE A FIREARM. THAT IS DANGEROUS AND MAY BE A CRIME.
THIS IS NOT A TOY. ADULT SUPERVISION REQUIRED. MISUSE OR CARELESS USE MAY CAUSE SERIOUS INJURY OR DEATH. MAY BE DANGEROUS UP TO 250 YARDS / 229 METERS. THIS AIRGUN IS RECOMMENDED FOR USE BY THOSE 16 YEARS OF AGE OR OLDER. READ ALL INSTRUCTIONS BEFORE USING. THE PURCHASER AND USER SHOULD CONFORM TO ALL LAWS GOVERNING THE USE AND OWNERSHIP OF THIS AIRGUN.
WARNING
This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Jordan –
Easy to load with speedloader. No feed issues. I put 225 bbs through it (5 reloads), and it started leaking co2. It got worse quickly, and is pretty much useless now as the co2 leaks out before you can reload. Maybe I just got a dud… I would highly recommend this and the Bushmaster MPW if only it wouldn’t leak!
Bryce Brian –
After about 3 clip loads 75 rounds one BB GOT STUCK IN THE SPRING, i attempted to get it out with a micro screw driver and got the BB out after 30 mins of Hell!. And now the spring wont let the bb pressure clip open alk the way so i cant load it with BB… so it is now a useless paper weight… it they sold parts i could replace the spring but they don’t sell parts…. so now im stuck pay $50 FOR A REPLACEMENT!!!!!! BOOO @ CROSMAN FOR NO PARTS REPLACEMENTS!!!!!!!
Marvin Magill –
Fun BB gun but the magazine is a pain. Bb got in the spring and while you can remove the spring it will hang up coming out and then ejects to parts unknown along with cover plate. Found the little screw but not the spring and plate. Might be able to fabricate a plate and find a similar spring but still poor design and annoying.
Raphael –
You can fix the co2 leaking from the top rubber piece, by taking out the screw at the bottom removing the black rubber piece and using plyers to tighten clock wise
Tyler –
After about 8 reloads my cousin got a bb stuck in my spring so I went in and took it out but the spring still does not let me load the bbs so now I’m stuck with buying a 60 dollar magazine after already buying a 200 gun but everything else about the gun is great, If Crosman could fix the magazine this gun would be so much better and worth the 200$
alfie –
I had a similar problem with a BB getting stuck in the spring. This was done because I forgot to push the latch back so the BB’s can be loaded. BUT I FIXED IT. What you need to do is take out the screw located at the bottom of the spring. After you take the screw out pry off the stopper. Beware because the spring will shoot the stopper out. Now here is where you’ll need PATIENCE!!! Carefully remove the spring from its track. You might need to twist it a little because when the BB was removed the spring got deformed. Once you get it out observe how the spring was wound and put the deformed part of the spring in the same position. Be careful because the spring is fragile. Occasionally see if the spring will go back into the track. if it does then you fixed it. If not keep trying. With patience you’ll get it. It took me about 2 hours but I got it working.
Johnny Rivas Jr –
Love the gun I bought it from you in the recent past. I’m 55 and go out back to shoot when I can I’ve used the gun maybe 6 times since I bought it but the magazine won’t hold a charge right from the top of the CO2 bottle I’m following instructions and screwing in the left one first but another bottle gone . Still.if I can cross this one fun stopping detail I would give it a 10
Bob –
Worked great till I let it sit for a couple months now it leaks out the top of mag where bbs feed into gun no issues with feeding or anything just this
Calvin –
Great gun, bad magazine. CO2 started leaking from the magazine on day 2, after only 250 BBs. Cannot shoot without C02 and wasted several C02 cartridges.
BILL –
I have been using my pellet gun that takes magazine model DSFAM and for the most part it chambers the BB’s no problem. The problem I am having is I am loosing my CO2 faster than I can load it into the mag. I had 4 good mags at one time and now I am down to 1 good one. This is a major problem as a new mag is over $60.00. I do as the directions tell me to. Looking at the mag with the back off where the CO2 goes I load the first CO2 into the port that says "FIRST". When I do that is leaks out the other chamber where the second CO2 goes. I am not happy with these mags. When I first bought my gun the mags were $44.99. Now they are over $60.00 bucks. Not sure if I will keep the gun or give it away. Not a happy customer here.
RICHARD VLASICH –
Great when I first purchased it. But it didn’t last long. Unbelievably frustrating when dealing with the magazine. And now it won’t come out at all.
””
Josh O –
The original magazine started leaking from the piercing needle so I purchased a replacement magazine and after 2 uses the replacement magazine piercing needle chipped as well
Michael Fenter –
Price was fair and the shipping was prompt.
However, it looks like Crosman changed the design in a way that makes the magazine tighter in the well than my previous magazines.
My whole reason for having this item is to train descretely on the cheap. I will have to modify the magazines in order to use them for that.
Miranda c. –
I have the same issue as many others here; the CO2 leaks out. I bought a new clip and had the same problem. Do you perhaps sell a similar clip that is compatible with the gun this one goes to?
Carlos L. del Pozo Crespo –
Saludos, dónde puedo comprar el resorte que empuja los BB hacia arriba.
Harold Froese –
Always buy accessories designed by the manufacturer
Michael McMullen –
Lots of fun. Need springs for the magazine. Cant find them at all. Went to your site cant get them. Can you help?
Eric williams –
Of 100 c02 cartridges. Only 15 stayed sealed to where I could fire it.i know to load em F" first,used Crossman Co2,the seals just were not rite,I even got ripped of on a magazine from Ebay that never came and I was a guest so they didn’t back it with their refund .unlucky me but I’m out 280$ for magazines but love the gun.
RICHARD WILLIAM Oller Sr –
MY GRANDSON IS REALY ENJOYING THE MAG SHOOTING UP CANS IN THE BACKYARD FOR PRACTISE. COULD YOU MAKE A LARGER LOAD MAG. FOR THAT TYPE OF RIFLE TO HOLD THREE CO2 CANISTER.
Jose Sanchez –
The magazine had one of the round screw to tighten the co2 cartridge missing
Tacboy –
I’ve had mine going on 3 yrs now and have not had any of the problems I read on here, guess mine was a fluke, I even enhanced it to push out another 50 fps enough to punch a hole through 1/2 inch particle board with only one clip…..not a bad warm up weapon, keeps me sharp, also have the AK1 which isn’t bad either
Jeffrey Lavenau –
Got my new (extra) magazine for my rifle. Works great!! Good to have a back up. Thank you.